鈥?/div>
All plastics meet UL94 V鈥揙, 30 min. oxygen index
CONTACTS
Arrangement
Ratings
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC or 250 VAC
Rated Load
UL/CSA
(Pending)
Material
0.5 A at 125 VAC
2.0 A at 30 VDC
0.3 A at 110 VDC
Silver nickel gold plated
Silver palladium available upon request
Bounce (typical)
Dielectric Strength
(at sea level)
Dropout
Insulation Resistance
Ambient Temperature
Operating
Storage
Vibration
79 mW
1.0 W at 20擄C (68擄F)
0.78 W at 40擄C (104擄F)
At nominal coil voltage
18擄C (32擄F)
Max. 110擄C (230擄F)
Shock
Max. Solder Temp.
Temp./Time
Max. Solvent Temp.
Max. Immersion Time
Weight
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time
(typical)
Release Time (typical)
Minimum operations
1 x 10
8
1 x 10
5
at 0.5 A, 125 VAC, resistive
2 x 10
5
at 1.0 A, 30 VDC, resistive
3 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
At 10 mA contact current
1 ms at operate or release
See table
Greater than 10% of nominal coil voltage
10
9
ohms min. at 25擄C, 500 VDC,
50% RH
At nominal coil voltage
-40擄C (-40擄F) to 85擄C (185擄F)
-40擄C (-40擄F) to 110擄C (230擄F)
Operational, 35 g, 10鈥?000 Hz
Operational, 50 g min., 11 ms
Non-destructive, 150 g min., 11 ms
See soldering profile
80擄C (176擄F)
30 seconds
2.3 grams
P.B.T. polyester
Tinned copper alloy, P.C.
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
NOTES
1. All values at 20擄C (68擄F).
2. Relay may pull in with less than 鈥淢ust Operate鈥?value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
Enclosure
Terminals
ZETTLER
electronics
1998-12-15
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1
2
3
4
