鈥?/div>
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Bounce (typical)
Dielectric Strength
(at sea level)
Minimum operations
2 x 10
7
1 x 10
5
at 2 A, 30 VDC or 1 A, 125 VAC
2 x 10
6
at 1 A, 30 VDC or .5 A, 125 VAC
3 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
3 ms
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
1000 megohms min. at 20擄C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40擄C (-40擄F) to 85擄C (185擄F)
-40擄C (-40擄F) to 115擄C (239擄F)
50 g at 10鈥?00 Hz
50 g
P.B.T. polyester
Tinned copper alloy, P.C.
270擄C (518擄F)
5 seconds
80擄C (176擄F)
30 seconds
5 grams
Rated Load
UL/CSA
Material
2 A at 25 VDC resistive
1 A at 120 VAC resistive
Gold plated silver against palladium silver.
Gold plated palladium silver against palladium
silver (Suffix 鈥淎鈥?
< 50 milliohms initially
Insulation Resistance
Dropout
Resistance
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature
Standard coil: 128 mW
Sensitive coil: 96 mW
0.9 W at 20擄C (68擄F)
Max. 115擄C (239擄F)
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
NOTES
1.
2.
3.
4.
All values at 20擄C (68擄F).
Relay may pull in with less than 鈥淢ust Operate鈥?value.
Relay has fixed coil polarity.
For complete isolation between the relay鈥檚 magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
ZETTLER
electronics
2000--11-17
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1
2
