鈥?/div>
AC coils
Dielectric strength 5000 Vrms
Low cost
Flux tight package
10 Amp switching - single pole contacts
Isolation spacing greater than 8mm
Molded materials: all 94V-0
UL and Canadian file E43203
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 300 W, 2500 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC/400 VAC
Inductive load:
(cos
脴
=0.4)
Max. switched power: 150W or 1875VA
Max. Switched current: 10A
Max. switched voltage: 125VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at rated load
8 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
1000 megohms min. at 20擄C,
500 VDC 50% RH
Greater than 30%
of nominal coil voltage
At nominal coil voltage
-40擄C (-40擄F) to 70擄C (158擄F)
-40擄C (-40擄F) to 105擄C (221擄F)
0.062" DA at 10鈥?5 Hz
10 g
PC (94V-0)
Tinned copper alloy, P.C.
270擄C (518擄F)
5 seconds
17 grams
Rated Load
UL, CUR
Min. Load
Material
Resistance
10 A 250 VAC, resistive
1
/ HP 277 VAC
2
5 VDC, .01 A
Silver alloy
30 milliohms initially (6V, 1A method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
576 mW
Max. Solder Temp.
1.5 W at 20擄C (68擄F) ambient
1.2 W at 40擄C (104擄F) ambient
36擄C (65擄F) at nominal coil voltage
Max. 105擄C (221擄F)
Max. Solder Time
Weight
NOTES
1. All values at 20擄C (68擄F).
2. Relay may pull in with less than 鈥淢ust Operate鈥?value.
3. Specifications subject to change without notice.
www.marelcom.ch
1
2
