DATA SHEET : ASPP205 , ASPP205-100
Description: Pillow block pressed steel housing. Setscrew type.
Shaft dia
mm
inch
25
1
H
L
J
Nominal dimensions
A
N
H
1
H
2
Bolt size
B
S
M10
3/8
Bearing
Number
Housing
Number
Mass of unit
kg.
lb.
0.3
0.3
0.7
0.7
Max. load. Recommended
N
lbf
Radial Axial Radial
Axial
3500
1400
770
208
(1)
28.6 108 86
32 11.5
4
66.3 29.8
8
1.1/8 4.1/4 3.3/8 1.1/4 29/64 0.157 2.7/32 1.063 0.295
AS205
AS205-100
PP205
PP205
Mounting of the Housing:
Although an advantage of the NTN bearing unit is that it can be fitted easily and will function efficiently on any part of the machine, attention must be paid to the following points in
order to ensure its normal service life.
1. The surface on which the housing is mounted must be sufficiently rigid.
2. The surface on which the housing is mounted should be as flat as possible. (The housing should sit firmly in position). Deformation of the housing caused by incorrect mounting
will in turn cause deformation of the bearing leading to its premature breakdown.
o
3. It is desirable that the angle between the surface on which the hosing is mounted and the shaft be maintained to a tolerance of +/- 2 .
Maintenance free type.
The NTN Maintenance free bearing unit contains a high grade lithium based grease, suitable for use over a long period, which is ideal for sealed bearings.
Further information is contained in Catalogue 2400-VI/E if in doubt as to the suitaility of any prodyct for the intended application advice should by sought.
1
