a
FEATURES
Laser Trimmed to High Accuracy:
10.000 V 5 mV (L and U Grades)
Trimmed Temperature Coefficient:
5 ppm/ C max, (L and U Grades)
Noise Reduction Capability
Low Quiescent Current: 4 mA max
Output Trim Capability
MIL-STD-883 Compliant Versions Available
+V
IN
2
R
S
NOISE
REDUCTION
8
High Precision
10 V Reference
AD587
FUNCTIONAL BLOCK DIAGRAM
A1
R
F
R
T
6 V
OUT
5 TRIM
R
I
AD587
4
GND
NOTE:
PINS 1,3, AND 7 ARE INTERNAL TEST POINTS.
NO CONNECTIONS TO THESE POINTS.
PRODUCT DESCRIPTION
PRODUCT HIGHLIGHTS
The AD587 represents a major advance in the state-of-the-art in
monolithic voltage references. Using a proprietary ion-implanted
buried Zener diode and laser wafer trimming of high stability
thin-film resistors, the AD587 provides outstanding perfor-
mance at low cost.
The AD587 offers much higher performance than most other
10 V references. Because the AD587 uses an industry standard
pinout, many systems can be upgraded instantly with the
AD587. The buried Zener approach to reference design pro-
vides lower noise and drift than bandgap voltage references. The
AD587 offers a noise reduction pin which can be used to further
reduce the noise level generated by the buried Zener.
The AD587 is recommended for use as a reference for 8-, 10-,
12-, 14- or 16-bit D/A converters which require an external
precision reference. The device is also ideal for successive
approximation or integrating A/D converters with up to 14 bits
of accuracy and, in general, can offer better performance than
the standard on-chip references.
The AD587J, K and L are specified for operation from 0擄C to
+70擄C, and the AD587S, T and U are specified for 鈥?5擄C to
+125擄C operation. All grades are available in 8-pin cerdip. The
J and K versions are also available in an 8-pin Small Outline IC
(SOIC) package for surface mount applications, while the J, K,
and L grades also come in an 8-pin plastic package.
1. Laser trimming of both initial accuracy and temperature
coefficients results in very low errors over temperature with-
out the use of external components. The AD587L has a
maximum deviation from 10.000 V of
鹵
8.5 mV between 0擄C
and +70擄C, and the AD587U guarantees
鹵
14 mV maximum
total error between 鈥?5擄C and +125擄C.
2. For applications requiring higher precision, an optional fine
trim connection is provided.
3. Any system using an industry standard pinout 10 volt refer-
ence can be upgraded instantly with the AD587.
4. Output noise of the AD587 is very low, typically 4
碌V
p-p. A
noise reduction pin is provided for additional noise filtering
using an external capacitor.
5. The AD587 is available in versions compliant with MIL-
STD-883. Refer to the Analog Devices Military Products
Databook or current AD587/883B data sheet for detailed
specifications.
REV. D
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
漏 Analog Devices, Inc., 2000
1
2
3
4
5
6
7
8
