Industrial Current/Voltage
Output Driver,
Programmable Ranges
Preliminary Technical Data
FEATURES
Current Output Ranges: 4鈥?0mA, 0鈥?0mA or 0鈥?4mA,
鹵20ma, 鹵24ma
B Grade - 0.1% Total Unadjusted Error (TUE)
A Grade - 0.3% Total Unadjusted Error (TUE)
5ppm/擄C Output Drift
Voltage Output Ranges: 0-5V, 0-10V, 鹵5V, 鹵10V,
20% over-range
B Grade - 0.1% Total Unadjusted Error (TUE)
A Grade - 0.3% Total Unadjusted Error (TUE)
Flexible Serial Digital Interface
On-Chip Output Fault Detection
PEC Error Checking
Asynchronous CLEAR Function
Power Supply Range
AV
DD
: = +12V to +24V (+/-10%)
AV
SS
: = -12V to -24V (+/-10%)
Output Loop Compliance to AV
DD
鈥?2.5 V
Temperature Range: -40擄C to +105擄C
LFCSP Packages
AD5750
Voltage output is provided from a separate pin that can be
configured to provide 0V to 5V, 0V to 10V,
鹵5V
or
鹵10V
output ranges. An over-range of 20% is available on the voltage
ranges.
Analog outputs are short and open circuit protected and can
drive capacitive loads of 1uF and inductive loads of 0.1H.
The device is specified to operate with a power supply range
from
鹵12
V to
鹵24
V. Output loop compliance is 0 V to AV
DD
鈥?2.5 V.
The flexible serial interface is SPI and MICROWIRE
compatible and can be operated in 3-wire mode to minimize the
digital isolation required in isolated applications. The interface
also features an optional PEC error checking feature using
CRC-8 error checking, useful in industrial environments where
data communication corruption can occur.
The device also includes a power-on-reset function ensuring
that the device powers up in a known state and an
asynchronous CLEAR pin which sets the outputs to zero-scale /
mid-scale voltage output or the low end of the selected current
range.
A HW SELECT pin is used to configure the part for hardware
or software mode on power up.
The total output error is typically
鹵0.1%
in both current mode
and voltage mode.
Table 1. Related Devices
Part Number
AD5422
Description
Single Channel, 16-Bit, Serial
Input Current Source and
Voltage Output DAC
APPLICATIONS
Process Control
Actuator Control
PLC
GENERAL DESCRIPTION
The AD5750 is a single channel, low-cost, precision,
voltage/current output driver with hardware or software
programmable output ranges. The software ranges are
configured via an SPI/Microwire compatible serial interface.
The AD5750 targets applications in PLC and industrial process
control. The analog input to the AD5750 is provided from a
low voltage, single supply digital-to-analog converter and is
internally conditioned to provide the desired output
current/voltage range.
The output current range is programmable across five current
ranges -
4鈥?0mA, 0鈥?0mA or 0鈥?4mA, 鹵20ma and 鹵24ma.
Rev. PrC
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
漏2008 Analog Devices, Inc. All rights reserved.