Figure 1.
with very low input bias current. Input offset voltage and input
offset voltage drift are laser trimmed for precision performance.
The ultralow input current of the part is achieved with Topgate鈩?/div>
JFET technology, a process development exclusive to Analog
Devices, Inc. This technology allows fabrication of extremely
low input current JFETs compatible with a standard junction
isolated bipolar process. The 10
15
惟 common-mode impedance,
which results from the bootstrapped input stage, ensures that
the input current is essentially independent of the common-
mode voltage.
The AD549 is suited for applications requiring very low input
current and low input offset voltage. It excels as a preamp for a
wide variety of current output transducers, such as photodiodes,
photomultiplier tubes, or oxygen sensors. The AD549 can also
be used as a precision integrator or low droop sample-and-hold.
The AD549 is pin compatible with standard FET and electrometer
op amps, allowing designers to upgrade the performance of
present systems at little additional cost.
The AD549 is available in a TO-99 hermetic package. The case
is connected to Pin 8, thus, the metal case can be independently
1
connected to a point at the same potential as the input terminals,
minimizing stray leakage to the case. The AD549 is available in
four performance grades. The J, K, and L versions are rated over
the commercial temperature range of 0擄C to +70擄C. The S grade
is specified over the military temperature range of 鈭?5擄C to +125擄C
and is available processed to MIL-STD-883B, Rev. C. Extended
reliability plus screening is also available. Plus screening includes
168 hour burn-in, as well as other environmental and physical
tests derived from MIL-STD-883B, Rev. C.
PRODUCT HIGHLIGHTS
1.
The AD549 input currents are specified, 100% tested, and
guaranteed after the device is warmed up. They are guaran-
teed over the entire common-mode input voltage range.
The AD549 input offset voltage and drift are laser trimmed
to 0.25 mV and 5 渭V/擄C (AD549K), and to 1 mV and
20 渭V/擄C (AD549J).
A maximum quiescent supply current of 700 渭A minimizes
heating effects on input current and offset voltage.
AC specifications include 1 MHz unity-gain bandwidth
and 3 V/渭s slew rate. Settling time for a 10 V input step is
5 渭s to 0.01%.
2.
3.
4.
Protected by U.S. Patent No. 4,639,683.
Rev. H
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 漏2002鈥?008 Analog Devices, Inc. All rights reserved.