1.0A USB Port/Adapter
Lithium-Ion/Polymer Battery Charger
General Description
The AAT3690 BatteryManager is a highly integrat-
ed single-cell lithium-ion/polymer battery charger
IC designed to operate with USB port and AC
adapter inputs. It requires the minimum number of
external components.
The AAT3690 precisely regulates battery charge
voltage and current for 4.2V lithium-ion/polymer
battery cells. Adapter charge current rates can be
programmed up to 1.0A. In the absence of an
adapter and with a USB port connected, the bat-
tery can also be charged by USB power. The USB
charge current can be programmed up to 1A. A
Charge Reduction Loop is also built in to allow
users to charge the battery with the available cur-
rent from a USB port, while keeping the port volt-
age regulated. USB charging is disabled when an
adapter is present.
Battery temperature and charge state are fully
monitored for fault conditions. In the event of an
over-voltage or over-temperature condition, the
device will automatically shut down, thus protecting
the charging device, control system, and the bat-
tery under charge. Status monitor output pins are
provided to indicate the battery charge status by
directly driving two external LEDs.
The AAT3690 is available in a Pb-free, thermally-
enhanced, space-saving 12-pin 3x3mm TDFN
package and is rated over the -40擄C to +85擄C tem-
perature range.
AAT3690
Features
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
BatteryManager
鈩?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
USB/AC Adapter System Power Charger
鈥?USB: Programmable up to 1.0A
鈥?Adapter: Programmable up to 1.0A
4.0V to 5.5V Input Voltage Range
Adapter Presence Automatically Disables
USB Charging
High Level of Integration With Internal:
鈥?Charging Devices
鈥?Reverse Blocking Diodes
鈥?Current Sensing
Automatic Recharge Sequencing
Digital Thermal Regulation in ADP Charge
Charge Reduction Loop in USB Charge
Battery Temperature Monitoring
Full Battery Charge Auto Turn-Off
Over-Current Protection
Over-Voltage Protection
Emergency Thermal Protection
Power On Reset and Soft Start
Serial Interface Status Reporting
12-Pin 3x3mm TDFN Package
Applications
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
Cellular Telephones
Digital Still Cameras
Hand-Held PCs
MP3 Players
Personal Data Assistants (PDAs)
Other Lithium-Ion/Polymer Battery-Powered
Devices
Typical Application
Enable
USB Input
USB
USBSET
R
SETUSB
EN
BAT
TS
C2
10渭F
BATT+
AAT3690
ADP Input
R
SETADP
ADP
ADPSET
STAT1
BATT-
CT
C
T
GND
STAT2
TEMP
Battery Pack
3690.2007.01.1.2
1
next
AAT3690IWP-4.2-T1相關(guān)型號PDF文件下載
-
型號
版本
描述
廠商
下載
-
英文版
3-Channel Charge-Pump LED Driver
AAT
-
英文版
3-Channel Charge-Pump LED Driver
AAT [Advan...
-
英文版
Low Cost 1x/2x 4 Channel Charge Pump WLED Driver
ANALOGICTECH&nb...
-
英文版
Low Cost 1x/2x 4 Channel Charge Pump WLED Driver
ANALOGICTECH
-
英文版
MicroPower⑩ Regulated Charge Pump
ANALOGICTECH
-
英文版
MicroPower⑩ Regulated Charge Pump
ANALOGICTECH&nb...
-
英文版
MicroPower⑩ Regulated Charge Pump
ANALOGICTECH
-
英文版
MicroPower⑩ Regulated Charge Pump
AAT
-
英文版
MicroPower⑩ Regulated Charge Pump
ANALOGICTECH&nb...
-
英文版
500mA High Efficiency Charge Pump for White LED Flash Applic...
ANALOGICTECH
-
英文版
500mA High Efficiency Charge Pump for White LED Flash Applic...
ANALOGICTECH&nb...
-
英文版
High Efficiency 1.5X Fractional Charge Pumps For White LED A...
ANALOGICTECH
-
英文版
High Efficiency 1.5X Fractional Charge Pumps For White LED A...
ANALOGICTECH&nb...
-
英文版
High Efficiency 1.5x Fractional Charge Pump for White LED Ap...
-
英文版
High Efficiency 2X Charge Pump
ANALOGICTECH [A...
-
英文版
3-Channel Charge Pump For White LED Applications
ANALOGICTECH&nb...
-
英文版
High Efficiency 1X/1.5X Fractional Charge Pump for White LED...
ANALOGICTECH
-
英文版
High Efficiency 1X/1.5X Fractional Charge Pump for White LED...
ANALOGICTECH&nb...
-
英文版
High Efficiency 1X/1.5X Fractional Charge Pump for White LED...
ETC
-
英文版
High Efficiency 1X/1.5X Fractional Charge Pump for White LED...
ETC [ETC]