音影先锋亚洲天堂网|电影世界尽头的爱完整版播放|国产 熟女 91|高清无码免费观看欧美日韩|韩国一区二区三区黄色录像|美女亚洲加勒比在线|亚洲综合网 开心五月|7x成人在线入口|成人网站免费日韩毛片区|国产黄片?一级?二级?三级

A29800TV-90 Datasheet

  • A29800TV-90

  • 1024K X 8 Bit / 512K X 16 Bit CMOS 5.0 Volt-only, Boot Secto...

  • 34頁

  • AMICC

掃碼查看芯片數據手冊

上傳產品規格書

PDF預覽

A29800 Series
1024K X 8 Bit / 512K X 16 Bit CMOS 5.0 Volt-only,
Preliminary
Features
n
5.0V
鹵
10% for read and write operations
n
Access times:
- 55/70/90 (max.)
n
Current:
- 28mA read current (word mode)
- 20 mA typical active read current (byte mode)
- 30 mA typical program/erase current
- 1
碌A(chǔ)
typical CMOS standby
n
Flexible sector architecture
-
16 Kbyte/ 8 KbyteX2/ 32 Kbyte/ 64 KbyteX15 sectors
-
8 Kword/ 4 KwordX2/ 16 Kword/ 32 KwordX15 sectors
-
Any combination of sectors can be erased
-
Supports full chip erase
-
Sector protection:
A hardware method of protecting sectors to prevent
any inadvertent program or erase operations within
that sector
n
Top or bottom boot block configurations available
n
Embedded Erase Algorithms
- Embedded Erase algorithm will automatically erase
the entire chip or any combination of designated
sectors and verify the erased sectors
- Embedded Program algorithm automatically writes
and verifies bytes at specified addresses
n
Typical 100,000 program/erase cycles per sector
n
20-year data retention at 125擄C
- Reliable operation for the life of the system
n
Compatible with JEDEC-standards
- Pinout and software compatible with single-power-
supply Flash memory standard
-
Superior inadvertent write protection
n
Data
Polling and toggle bits
-
Provides a software method of detecting completion
of program or erase operations
n
Erase Suspend/Erase Resume
-
Suspends a sector erase operation to read data from,
or program data to, a non-erasing sector, then
resumes the erase operation
n
Hardware reset pin (
RESET
)
-
Hardware method to reset the device to reading array
data
n
Package options
-
44-pin SOP or 48-pin TSOP (I)
Boot Sector Flash Memory
General Description
The A29800 is a 5.0 volt only Flash memory organized as
1048,576 bytes of 8 bits or 524,288 words of 16 bits each. The
A29800 offers the
RESET
function. The 1024 Kbytes of data
are further divided into nineteen sectors for flexible sector erase
capability. The 8 bits of data appear on I/O
0
- I/O
7
while the
addresses are input on A1 to A18; the 16 bits of data appear on
I/O
0
~I/O
15
. The A29800 is offered in 44-pin SOP and 48-Pin
TSOP packages. This device is designed to be programmed in-
system with the standard system 5.0 volt VCC supply. Additional
12.0 volt VPP is not required for in-system write or erase
operations. However, the A29800 can also be programmed in
standard EPROM programmers.
The A29800 has the first toggle bit, I/O
6
, which indicates whether
an Embedded Program or Erase is in progress, or it is in the
Erase Suspend. Besides the I/O
6
toggle bit, the A29800 has a
second toggle bit, I/O
2
, to indicate whether the addressed sector
is being selected for erase. The A29800 also offers the ability to
program in the Erase Suspend mode. The standard A29800
offers access times of 55, 70 and 90 ns, allowing high-speed
microprocessors to operate without wait states. To eliminate bus
contention the device has separate chip enable (
CE
), write
enable (
WE
) and output enable (
OE
) controls.
The device requires only a single 5.0 volt power supply for both
read and write functions. Internally generated and regulated
voltages are provided for the program and erase operations.
The A29800 is entirely software command set compatible with
the JEDEC single-power-supply Flash standard. Commands are
written to the command register using standard microprocessor
write timings. Register contents serve as input to an internal
state-machine that controls the erase and programming circuitry.
Write cycles also internally latch addresses and data needed for
the programming and erase operations. Reading data out of the
device is similar to reading from other Flash or EPROM devices.
Device programming occurs by writing the proper program
command sequence. This initiates the Embedded Program
algorithm - an internal algorithm that automatically times the
program pulse widths and verifies proper program margin.
Device erasure occurs by executing the proper erase command
sequence. This initiates the Embedded Erase algorithm - an
internal algorithm that automatically preprograms the array (if it
is not already programmed) before executing the erase
operation.
PRELIMINARY
(May, 2001, Version 0.0)
1
AMIC Technology, Inc.

A29800TV-90相關型號PDF文件下載

您可能感興趣的PDF文件資料

熱門IC型號推薦

掃碼下載APP，
一鍵連接廣大的電子世界。

在線人工客服

買家服務：
賣家服務：
技術客服：

0571-85317607

網站技術支持

13606545031

客服在線時間周一至周五
9:00-17:30

關注官方微信號，
第一時間獲取資訊。

建議反饋
返回頂部

建議反饋

聯系人：

聯系方式：

按住滑塊，拖拽到最右邊
>>
感謝您向阿庫提出的寶貴意見，您的參與是維庫提升服務的動力！意見一經采納，將有感恩紅包奉上哦！