550D
Vishay Sprague
Solid-Electrolyte T
ANTALEX廬
Capacitors
for High Frequency Power Supplies
FEATURES
鈥?Hermetically-sealed, axial-lead solid tantalum capacitors
鈥?Small size and long life
鈥?Exceptional capacitance stability and excellent resistance
to severe environmental conditions
鈥?The military equivalent is the CSR21 which is qualified to
MIL-C-39003/09
APPLICATIONS
Designed for power supply filtering applications at above
100kHz
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55擄C to + 85擄C. (To + 125擄C
with voltage derating.)
Capacitance Tolerance:
At 120 Hz, + 25擄C.
鹵
20% and
鹵
10% standard.
鹵
5% available as a special.
Dissipation Factor:
At 120 Hz, + 25擄C. Dissipation factor,
as determined from the expression 2蟺fRC, shall not exceed
the values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
At + 25
擄
C:
Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
At + 85
擄
C:
Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At +125
擄
C:
Leakage current shall not exceed 15 times the
values listed in the Standard Ratings Tables.
Life Test:
Capacitors shall withstand rated DC voltage
applied at + 85擄C for 2000 hours or derated DC voltage
applied at + 125擄C for 1000 hours.
Following the life test:
1. DCL shall not exceed 125% of the initial requirement.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed
鹵
5%.
ORDERING INFORMATION
550D
MODEL
006
2
R
DC VOLTAGE
CASE STYLE NUMBER
RATING AT + 85擄C
CODE
This is expressed in
This is expressed in picofarads. The X0 =
鹵
20%
See Ratings 2 = Insulated
volts. To complete the
first two digits are the significant figures. X9 =
鹵
10%
sleeve.
and Case
three-digit block, zeros Codes Table.
The third is the number of zeros to
X5 =
鹵
5%
follow. Standard capacitance ratings
Special Order. precede the voltage
rating.
are in accordance with EIA preferred
number series wherever possible.
157
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
T
PACKAGING
T = Tape and Reel
DIMENSIONS
in inches [millimeters]
1.500
鹵
0.250
[38.10
鹵
6.35]
L
1.500
鹵
0.250
[38.10
鹵
6.35]
D
Dia.
Solid Tinned
Leads
J
Max.
0.047 [1.19] Max.
0.125 [3.18] Max.
WITH INSULATING SLEEVE*
CASE CODE
R
S
D
0.289
鹵
0.016
[7.34
鹵
0.41]
0.351
鹵
0.016
[8.92
鹵
0.41]
L
0.686
鹵
0.031
[17.42
鹵
0.79]
0.786
鹵
0.031
[19.96
鹵
0.79]
J (MAX.)
0.822
[20.88]
0.922
[23.42]
AWG NO.
22
22
LEAD SIZE
NOM. DIA.
0.025
[0.64]
0.025
[0.64]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.
www.vishay.com
24
For technical questions, contact tantalum@vishay.com
Document Number: 40017
Revision 11-Nov-04
VISHAY
1
2
3
4
5
6
7
8
