D6 Key Switch
The D6 is a single-pole, momentary
action, normally open keyswitch specially
designed for digital electronic controls.
Its small size enables keyboard design
with minimum center spacing of
12.7 mm (0.500).
The commoned terminals offer the
possibility of X, Y coding on just a single
sided printed circuit board.
A total travel of 0.8 mm (0.0315) combi-
ned with a snap effect provides the user
with a smooth, gentle, yet positive tactile
feedback.
Built-in buttons (square or round) are
available in several colors and have
been designed to 鏗乼 directly on front
panels.
The D6 version with plunger 3.3
3.3 mm (0.130 0.130) can accept any
standard or customer-designed
button.
Flat D6 can be actuated with customer
designed buttons or behind a membrane.
A version exists for high temperature,
resisting wave soldering in severe
conditions. This type is offered only in
black.
Applications
Video, TV sets, remote control, video
and disc recorder
Audio, car radio, portable radio
Test and measuring equipment
Automobiles
Electronic games
Domestic appliances
Telephones and intercoms
Construction
Function
Contact arrangement
Distance between button centers, min.
Contacts
Electrical data
Switching power max.
Switching voltage max.
Switching current max.
Dielectric strength (50 Hz/1 Min.)
Operating life with max. switching power
Contact resistance
Insulation resistance
Contact bounce
Mechanical data
Switching travel
Operating force
Further data
Contact material
Insulation material
Momentary
1 make contact = SPST, NO
12.7 mm (0.500 inch)
PC pins
6 VA
100 V AC
100 mA AC
1000 V AC
2.5 10
5
operations
100 m鈩?/div>
10
11
鈩?/div>
3 ms
0.8 鹵 0.2 (0.031 鹵 0.0078)
1.3N 鹵 30% (130 grams 鹵 30%)
base
button
Operating temperature
Climatic category
Hand soldering
Wave or bath soldering
Cleaning
Silver plated
PBT (white color)
PBT for high temperature (blue color)
ABS high temperature
鈥?20擄C to + 85擄C
21 days at 40擄C
350擄C for 3 seconds
225擄C for 5 seconds
Use solvents compatible with ABS.
Ordering code: see next page.
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
B-11
1
2
