IMS30 SERIES
Powering Communciations and Technology
Input to output electric strength test 1500 V DC
Input voltage ranges 32...75VDC for -0302
Dual output
JAN, 2001
48V
input
Dual outputs 5V & 3.3V ; 3.3V & 1.8V
IMS30 Series
鈥?Industry standard pin-out
鈥?Fixed frequency operation
鈥?High efficiency up to 89 %
鈥?2" x 2" platform with 9.4 mm profile
鈥?Low output noise
鈥?Soft start
鈥?Shut down input, output voltages adjustable
鈥?Programmable input undervoltage lockout
鈥?Synchronisation
鈥?Outputs no-load, overload and short-circuit proof
鈥?Operating ambient temperature 鈥?0...71
o
C
鈥?Thermal protection with auto-reset (non latching)
鈥?Emissions below EN 55022, level B
鈥?Immunity to IEC/EN 61000-4-2,-3,-4,-5 and -6
Safety according to IEC/EN 60950, UL 1950
LGA
C
Approvals pending
Summary
The IMS 30 series of board mountable 30 Watt DC-DC con-
verters has been designed according to the latest industry
requirements and standards. The converters are particu-
larly suitable for applications in industry and telecommuni-
cation where variable input voltages or high transient volt-
ages are prevalent.
Features include efficient input and output filtering with un-
surpassed transient and surge protection, low output ripple
and noise, consistently high efficiency over the entire input
voltage range, high reliability as well as excellent dynamic
response to load and line changes.
The converters provide supplementary insulation with
SELV outputs as e.g. required in battery supported systems
where the bus voltage may exceed the SELV limit of
60 V DC. They are designed and built according to the in-
ternational safety standards IEC/EN 60950, UL 1950, CAN/
CSA C22.2 No.950-95. Approvals pending.
The circuit comprises integrated planar magnetics and all
components are automatically assembled and soldered
onto a single PCB without any wire connections. The pro-
prietary magnetic feedback solution ensures maximum reli-
abilityand repeatability in the control loop over all operating
conditions. Careful considerations of possible thermal
stresses ensure the absence of hot spots providing long life
in environments where temperature cycles are a reality. The
thermal design allows operation at full load up to an ambi-
ent temperature of 71擄C in free air without using any potting
material.
Page
Auxiliary Functions .......................................................... 6
Electromagnetic Compatibility (EMC) ............................. 7
Immunity to Environmental Conditions ............................ 8
Mechanical Data ............................................................. 9
Safety and Installation Instructions ............................... 10
Description of Option ..................................................... 11
Table of Contents
Page
Summary ......................................................................... 1
Type Survey and Key Data ............................................. 2
Type Key ......................................................................... 2
Functional Description ..................................................... 2
Electrical Input Data ........................................................ 3
Electrical Ouput Data ...................................................... 4
1/11 10130 DC
POWER-ONE
1
2
3
4
5
6
7
8
9
10
11
