鈻?/div>
Bushing mount
Optional AR pin feature
Non-standard features and specifications
available
Gangable
Model 3543 is currently available,
although not recommended for new
designs.
Model 3547
is preferred.
*R
Model 3545 is currently available,
although not recommended for new
designs.
Model 3548
is preferred.
3543/3545 - Precision Potentiometer
Electrical Characteristics
1
3543 3-Turn
3545 5-Turn
3543S-1/3545S-1
18.3
(.72)
14.35 鹵 .38
(.565 鹵 .015)
Standard Resistance Range ..............20 to 50 K ohms ......................50 to 50 K ohms
Total Resistance Tolerance ................鹵5 % ........................................鹵5 %
Independent Linearity ........................鹵0.25 % ....................................鹵0.25 %
Effective Electrical Angle ....................1080 擄 +10 擄, -0 擄 ....................1800 擄 +10 擄, -0 擄
Absolute Minimum Resistance/..........1 ohm or 0.1 % maximum........1 ohm or 0.1 % maximum
Minimum Voltage
(whichever is greater)
(whichever is greater)
Noise ..................................................100 ohms ENR maximum ........100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level........................................1,000 VAC minimum ................1,000 VAC minimum
Power Rating (Voltage Limited By Power Dissipation or
224 VAC [3543] or 273 VAC [3545], Whichever Is Less)
+70 擄C ............................................1 watt........................................1.5 watt
+125 擄C ..........................................0 watt........................................0 watt
Insulation Resistance (500 VDC) ........1,000 megohms minimum ........1,000 megohms minimum
Resolution ............................................See recommended part nos. ....See recommended part nos.
5.72 鹵 .38
(.225 鹵 .015)
10.31+ .00/ - .05
DIA.
(.406+.000/-.002)
3/8 " 32-UNEF-2ATHD
1
3
2
.25
X 45 擄 CHAMFER
(.010)
ADJUSTMENT
.81
SLOT
WIDE
(.032)
.81鹵.25
X
DEEP
(.032鹵.0160)
6.342 + .000/ - .023
(.2497+.0000/-.0009)
DIA.
Environmental Characteristics
1
Operating Temperature Range ..........+1 擄C to +125 擄C ......................+1 擄C to +125 擄C
Storage Temperature Range ..............-55 擄C to +125 擄C ....................-55 擄C to +125 擄C
Temperature Coefficient Over
Storage Temperature Range
2
........鹵50 ppm/擄C maximum/unit ......鹵50 ppm/擄C maximum/unit
Vibration..............................................15 G ..........................................15 G
Wiper Bounce ................................0.1 millisecond maximum ........0.1 millisecond maximum
Shock..................................................50 G ..........................................50 G
Wiper Bounce ................................0.1 millisecond maximum ........0.1 millisecond maximum
Load Life ............................................1,000 hours, 1 watt ..................1,000 hours, 1.5 watts
Total Resistance Shift ....................鹵2 % maximum ........................鹵2 % maximum
Rotational Life (No Load)....................300,000 shaft revolutions ........500,000 shaft revolutions
Total Resistance Shift ....................鹵5 % maximum ........................鹵5 % maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ....................鹵2 % maximum ........................鹵2 % maximum
IP Rating ............................................IP 40 ........................................IP 40
1.52
(.06)
7.92 鹵 .38
(.312 鹵 .015)
19.05 鹵 .38
(.750 鹵 .015)
20.62 鹵 .79
(.812 鹵 .031)
ADD .75 (19 MM) FOR ADDITIONAL CUPS.
OPTIONAL ANTIROTATION LUG
(-91) 1.42 X .50 ON 7.4 RADIUS
(.056 X .02)
(.29)
LENGTH 1.27 FROM MOUNTING SURFACE.
(SUGGESTED PANEL HOLE 1.6 DIA.)
(.063)
30 擄
鹵5擄
6.35
(.25)
Mechanical Characteristics
1
Stop Strength.................................................................................................53 N-cm (75 oz.-in.) min.
Mechanical Angle..................................................1080 擄 +10 擄, -0 擄 (3543); 1800 擄 +10 擄, -0 擄 (3545)
Torque (Starting & Running)......................................................................0.35 N-cm (0.5 oz.-in.) max.
Mounting..............................................................................................170-200 N-cm (15-18 lb.-in.)
Shaft Runout..................................................................................................0.08 mm (0.003 in.) T.I.R.
Lateral Runout ...............................................................................................0.13 mm (0.005 in.) T.I.R.
Shaft End Play ...............................................................................................0.25 mm (0.010 in.) T.I.R.
Shaft Radial Play ...........................................................................................0.08 mm (0.003 in.) T.I.R.
Pilot Diameter Runout ...................................................................................0.08 mm (0.003 in.) T.I.R.
Backlash ........................................................................................................................1.0 擄 maximum
Weight..................................................................................................................Approximately 21 gm
Terminals ..........................................................................................................Gold-plated solder lugs
Soldering Condition....................Recommended hand soldering using Sn95/Ag5 no clean solder,
0.025 鈥?wire diameter. Maximum temperature 399 擄C (750 擄F) for 3 seconds.
No wash process to be used with no clean flux.
Marking .................................................Manufacturer鈥檚 name and part number, resistance value and
tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Pots.) ...............................................................................2 cups maximum
Hardware ....................................................One lockwasher (H-37-2) and one mounting nut (H-38-2)
is shipped with each potentiometer.
1
2
15.88
R MAX.
(.625)
12.45
(.49)
22.23 鹵 .38
(.875 鹵 .015)
MTG. FACE
15.88 DIA. MIN.
(.625)
TOLERANCES: EXCEPT WHERE NOTED
.25
.13
DECIMALS: .XX 鹵
.XXX 鹵
(.010),
(.005)
FRACTIONS: 鹵1/64
MM
DIMENSIONS:
(IN.)
2
CCW
WIPER
At room ambient: +25 擄C nominal and 50 % relative humidity nominal, except as noted.
Consult manufacturer for complete specification details.
1
CLOCKWISE
3
CW
Recommended Part Numbers
Part Number*
3543S-1-102L
3543S-1-202L
3543S-1-502L
3543S-1-103L
Resistance
(鈩?
1,000
2,000
5,000
10,000
Resolution
(%)
.077
.062
.047
.040
Part Number
3545S-1-102L
3545S-1-202L
3545S-1-502L
3545S-1-103L
Resistance
(鈩?
1,000
2,000
5,000
10,000
Resolution
(%)
.043
.044
.038
.029
BOLDFACE
LISTINGS ARE IN STOCK AND READILY
AVAILABLE THROUGH DISTRIBUTION.
FOR SERVO MOUNT VERSION AND OTHER OPTIONS
CONSULT FACTORY.
TERMINALS:
L = RoHS COMPLIANT
BLANK = STANDARD
REV. 06/06
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
1
